Valor GE4 33" Electric Insert
Valor GE4 33" Electric Insert
Usually ready for pickup in 5–7 business days; we email you when it’s in.
Plug-in models need only a standard outlet. If yours is hard-wired or runs on 240V, any licensed electrical contractor can connect it: ask for a dedicated circuit for an electric fireplace and give them the installation manual on this page. We don’t recommend or arrange electricians.
The Valor GE4 is a 33-inch electric insert for an existing wood or gas fireplace, and it can also be built into a new zero-clearance opening. Live Flame LED projection gives three flame colours at five intensities over a glowing fire bed, with two crackle sounds. It plugs in on 120V and can be hard-wired or connected for 240V heating.
Specifications
- Voltage: 120V or 240V
- Heater: 1,400 / 2,800 W (120V / 240V)
- Flame: Live Flame LED projection, 3 flame colours x 5 intensities; glowing fire bed; two crackle sounds
- In the box: Engine with glass
- Install options: Zero clearance or insert, plug-in (optional hard-wire)
- Nominal width: 33"
Before you buy
- Pickup only. Order online and collect at our warehouse at 1380 Pemberton Ave, North Vancouver, by appointment, Tuesday to Friday. We do not ship or deliver.
- Buy and install yourself. We do not offer installation or service with this purchase.
- Plugs in on 120V (1,400 W), with an optional hard-wire. A hard-wired or 240V connection (2,800 W) must be made by a licensed electrician.
- For an insert install, a finishing kit is required and sold separately: the GE4CIK clean installation kit on its own, or the GE4SK1 shroud kit with a backing plate (GE4BPB1 or GE44SBP1) and a front (GE4CFV or GE4EDPW). The minimum fireplace opening and which fuel bed ships in the box are being confirmed with Valor.
- Boxed size and weight: confirmation pending. Unit dimensions and weight are also being confirmed with the manufacturer. Please check them with us before you plan your vehicle or your framing.
Downloads
Read the installation manual before you buy. It has the framing size, clearances and electrical requirements, and it is the document a licensed electrician will work from.